Lithium Nickel Cobalt Aluminium Oxides

The lithium nickel cobalt aluminium oxides (abbreviated as Li-NCA, LNCA, or NCA) are a group of mixed metal oxides. Some of them are important due to their application in lithium ion batteries. NCAs are used as active material on the positive pole (which is the cathode when the battery is discharged). NCAs are composed of the cations of the chemical elements lithium, nickel, cobalt and aluminium. The most important representatives as of this date have the general formula LiNi_''x''Co_''y''Al_''z''O₂ with ''x'' + ''y'' + ''z'' = 1. In case of the NCA comprising batteries currently available on the market, which are also used in electric cars and electric appliances, ''x'' ≈ 0,8, and the voltage of those batteries is between 3.6 V and 4.0 V, at a nominal voltage of 3.6 V or 3.7 V. A version of the oxides currently in use in 2019 is LiNi_0,84Co_0,12Al_0,04O₂.

Introduction

Lithium nickel cobalt aluminium oxides (NCAs) are mixed metal oxides of particular importance in their application in lithium-ion battery manufacturing, where they are used in the material for the cathode (battery's positive pole). They are composed of lattices of cations of the lithium, nickel, cobalt and aluminium, where the most important representatives as of this date have the general formula LiNi_''x''Co_''y''Al_''z''O₂ with ''x'' + ''y'' + ''z'' = 1.

Manufacturer of NCA

The main producers of NCA and their market shares in 2015 were Sumitomo Metal Mining with 58%, Toda Kogyo (BASF) with 16%, Nihon Kagaku Sangyo with 13% and Ecopro with 5%. Sumitomo supplies Tesla and Panasonic and was able to produce 850 tons of NCA per month in 2014. In 2016, Sumitomo increased its monthly production capacity to 2550 tons, and in 2018 to 4550 tons. In China, in Tongren County in Qinghai Province, a plant has been under construction since 2019, which will initially produce 1500 tons of NCA per month.

Properties of NCA

The usable charge storage capacity of NCA is about 180 to 200 mAh/g. This is well below the theoretical values; for LiNi_0,8Co_0,15Al_0,05O₂ this is 279 mAh/g. However, the capacity of NCA is significantly higher than that of alternative materials such as lithium cobalt oxide LiCoO₂ with 148 mAh/g, lithium iron phosphate LiFePO₄ with 165 mAh/g and NMC 333 LiNi_0,33Mn_0,33Co_0,33O₂ with 170 mAh/g. Like LiCoO₂ and NMC, NCA belongs to the cathode materials with layer structure. Due to the high voltage, NCA enables batteries with high energy density. Another advantage of NCA is its excellent fast charging capability. Disadvantages are the high costs and the limited resources of cobalt and nickel.

The two materials NCA and NMC have related structures, quite similar electrochemical behaviour and show similar performance, in particular relatively high energy densities and relatively high performance. It is estimated that the NCA battery of Model 3 contains between 4.5 and 9.5 kg of cobalt and 11.6 kg of lithium.

Lithium nickel oxide LiNiO₂, which is closely related to NCA, or nickel oxide NiO₂ itself, cannot yet be used as a battery material because they are mechanically unstable, shows a rapid loss of capacity and have safety issues.

Nickel-rich NCA: advantages and limitations

NCAs LiNi_''x''Co_''y''Al_''z''O₂ with x ≥ 0.8 are called nickel rich; those compounds are the most important variants of the substance class. The nickel-rich variants are also low in cobalt and therefore have a cost advantage, as cobalt is relatively expensive. Furthermore, as the nickel content increases, so does the voltage and thus the energy that can be stored in the battery. However, as the nickel content increases, the risk of thermal breakdown and premature aging of the battery also increases. When a typical NCA battery is heated to 180 °C, it will thermally run away. If the battery was previously overcharged, thermal run away can occur even at 65 °C. The aluminium ions in NCA increase stability and safety, but they reduce capacity because they do not participate in oxidation and reduction themselves.

Modifications of the material

To make NCA more resistant, in particular for batteries that need to operate at temperatures above 50 °C, the NCA active material is usually coated. The coatings demonstrated in research may comprise fluorides such as aluminium fluoride AlF₃, crystalline oxides (e.g. CoO₂, TiO₂, NMC) or glassy oxides (silicon dioxide SiO₂) or phosphates such as FePO₄.

NCA batteries: Manufacturer and use

As of 2018, the most important manufacturer of NCA batteries was reportedly Panasonic, or Panasonic's cooperation partner Tesla, as Tesla uses NCA as active material in the traction batteries of its car models. In Tesla Model 3 and Tesla Model X, LiNi_0,84Co_0,12Al_0,04O₂ is used. With a few exceptions, current electric cars as of 2019 use either NCA or alternatively lithium nickel manganese cobalt oxides (NMC). In addition to use in electric cars, NCA is also used in batteries for electronic devices, mainly by Panasonic, Sony and Samsung. Some cordless vacuum cleaners are also equipped with NCA batteries.

References

See also this alternative academic article source.

{{oxygen compounds

Lithium compounds
Nickel compounds
Cobalt compounds
Aluminium compounds
Oxygen compounds